섀도박스 울타리 계산기

Shadowbox fencing alternates pickets on opposite faces of the rail, so the fence reads as a similar finished surface from both yards rather than showing rails and fastener heads from one side, the way a single-sided privacy fence does. A small gap, commonly around half an inch to an inch, sits between the staggered boards, which lets some light and air through while still blocking a direct line of sight. It sits between privacy and board-on-board on the screening spectrum: more open than either, but still built for a semi-private boundary rather than an airy picket look.

Picket count on this page is computed per side using the same width-plus-gap pitch as a classic picket layout, since shadowbox boards are spaced rather than overlapped. Because shadowbox covers both faces of the rail, the actual board order for the full fence is roughly double the per-side count this calculator returns for one face, which is the single most common thing to miss when pricing this style against a one-sided fence. The standalone fence picket calculator is useful for re-running that per-side math against a different gap before doubling it.

Posts and rails are unaffected by the two-sided infill: spacing and rail count follow the same height-based rules as every other wood style on the wood fence calculator, 2 rails at 4 feet and under, 3 at 5 to 7 feet, 4 at 8 feet and taller, since the extra boards attach to the same rail run rather than adding structure. The fence rail calculator is the place to confirm rail count and total linear footage of rail stock separately from the picket decision.

For a side-by-side look at how shadowbox compares to board-on-board and a plain butted privacy layout, including when each one makes sense, board-on-board vs shadowbox vs solid privacy fence covers the tradeoffs in more depth than a materials calculator can. How many pickets for 100 feet of fence walks through the base picket pitch formula this page builds on, and the wood fence installation guide covers attaching alternating boards once the count is settled. The wood fence calculators hub lists every other style if shadowbox turns out not to be the final answer.

Shadowbox is primarily a wood construction technique, since the alternating slat layout is built board by board on site; vinyl and composite systems are generally sold as pre-assembled panels in a privacy style rather than as individual alternating slats, so a true shadowbox look is most practical in wood. If a vinyl or composite alternative is being priced for a similar semi-private look, it makes more sense to count pre-made panels than to translate this picket-pitch formula into those materials.

Because boards attach to both faces of the same rail run, rail spacing and fastening do more of the structural work on a shadowbox fence than on a single-sided style, even though the rail count itself follows the same height-based formula as any other wood fence. Checking that rails are sized and fastened to carry boards on both sides, rather than treating it as a single-sided attachment detail, is one of the judgment calls that falls outside what a material calculator can confirm on its own.

Because shadowbox is built board by board rather than as a pre-made panel, on-site layout accuracy matters more here than on a simpler privacy run: the alternating pattern only reads correctly if the gap and offset stay consistent from one picket to the next, so establishing the pitch once at the start of the run and holding it steady is more important than on a style where a slightly uneven gap is harder to notice. A story pole, a board marked with the picket and gap spacing, is a simple way installers keep that pattern consistent across a long run without remeasuring at every post.

Maintenance also looks a little different on a two-sided fence: both faces age and weather at a similar rate since both see roughly equal sun and moisture exposure, unlike a one-sided privacy fence where the show face often weathers differently from the structural face. That even exposure is one of the practical advantages of the style beyond its semi-private look, and it is worth factoring into a maintenance and staining schedule covering both sides equally rather than treating one face as the primary one.

Shadowbox also tends to suit properties where neighbors on both sides care about the finished look, since it is one of the few wood styles that gives both yards a comparable face rather than one side getting the structural rail view. That shared-appearance quality is sometimes the deciding factor over a plain privacy fence even when the privacy fence would be the lower-cost option, independent of the screening difference between the two styles.

Shadowbox also reads well on fences that run along a shared side yard, where a privacy fence's single finished face would otherwise leave one neighbor looking at exposed rails, since the alternating layout avoids that imbalance without requiring a conversation about which side gets the better-looking face.